MPA-Q 8x250
Eight-channel Network Amplifier
Features & Benefits
The MPA-Q 8x250 is part of the mid-power tier in the Q-SYS network amplifier portfolio, extending native Q-SYS integration into even more performance and distributed audio applications across hospitality, entertainment, retail and government environments.
Eight (8) output channels at 250 W per channel
Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required)
Eight (8) analog, line-level audio inputs, fully routable into Q-SYS or direct out
Two (2) gigabit Ethernet ports for redundant networked audio
Standalone mode offers ability to switch to available analog inputs if network connectivity drops
Quick audio restore after a power outage if PoE connection is available
Four (4) GPI inputs and two (2) NO/NC output relays
Full-rack width, 2RU form factor and included hardware for rack- or surface-mounting
Analog Mode bypasses networked audio and creates a fully analog amplifier; front panel display allows basic channel configuration in this mode
Rightsized for medium-to-large spaces: MPA-Q Series introduces a new mid-power tier to the Q-SYS network amplifier portfolio and is ideal for spaces where high-output amplifiers exceed operational needs, like hospitality and retail facilities, entertainment spaces and larger corporate and government environments.
Adapt to keep audio flowing: Ensure your audio system stays running with minimal interruptions. If network connectivity drops, MPA-Q Series amplifiers offer the ability to automatically switch the source to available analog inputs to maintain sound continuity. In the event of a power outage, network audio can be restored within seconds if a PoE connection is available.
Venue-wide audio with Q-SYS: MPA-Q Series network amplifiers extend a seamless Q-SYS experience to even more spaces, delivering native audio routing and control in both distributed and performance audio applications throughout your venue.
Integrated audio, video and control: MPA-Q Series network amplifiers are driven by the Q-SYS Full Stack AV Platform, which unifies data, devices and a cloud-first open architecture to deliver a fully integrated audio, video and control solution that offers simpler integration and software-based scalability.
Technical Specifications
| Specifications | MPA-Q 8×250 | ||
|---|---|---|---|
| Amplifier Output | |||
| Freq response @ 20Hz-20kHz, 8Ω | +0.2 dB / -0.7 dB | ||
| Output THD+N @1kHz | 0.01%-0.03% typical; 1% max | ||
| SNR @ 20Hz-20kHz, 8Ω, A-weighted | >112 dB | ||
| Gain @+4dBu input | 31 dB | ||
| Damping factor | >160 | ||
| Analog Inputs (line-level only) | |||
| Input dynamic range (unweighted) | >108 dB | ||
| Input impedance (balanced & unbalanced) @ 1kHz | >11k balanced and >5.5k unbalanced | ||
| Sample rate | 48 kHz | ||
| DSP | |||
| DSP Processing | Gain, Polarity, IIR Filters (HPF, Parametric, Shelf, Array Correction), FIR Filters (1024 taps per channel), Delay (up to 2020 milliseconds per channel), Limiters (narrow-band, RMS, and peak limiters) | ||
| Output Power | Maximum¹ | Continuous² | |
|
All channels driven A, B, C, D, E, F, G, H |
100 V | 250 W | 150 W |
| 70 V | 250 W | 150 W | |
| 8 Ω | 250 W | 150 W | |
| 4 Ω | 250 W | 150 W | |
| 2 Ω | 250 W | 150 W | |
| Maximum¹ | Continuous² | ||
|
Single channel driven A or B or C or D or E or F or G or H |
100 V | 500 W | 150 W |
| 70 V | 500 W | 150 W | |
| 8 Ω | 500 W | 150 W | |
| 4 Ω | 500 W | 150 W | |
| 2 Ω | 500 W | 150 W | |
| Maximum¹ | Continuous² | ||
|
2 channels bridged A+B or C+D or E+F or G+H |
100 V | 500 W | 300 W |
| 70 V | 500 W | 300 W | |
| 8 Ω | 500 W | 300 W | |
| 4 Ω | 500 W | 300 W | |
| 2 Ω | Not supported | ||
| Environmental | |||
| Operating temperature range | 32° to 104° F (0° - 40° C) | ||
| Storage temperature range | -4° to 158° F (-20° to +70° C) | ||
| Humidity range | 5% - 85% RH | ||
| Physical | |||
| Audio I/O connections |
Output: 8x channels (Euro 7.62 mm) Input: 8x channels (Euro 3.5 mm) |
||
| Networking |
2x 1 Gbps Ethernet ports LAN A optionally accepts PoE (802.3af Type 1) for quick time-to-audio following a power interruption |
||
| GPI | 0-3.3V DC Closure | ||
| Mounting options | Front rack ears come installed for rack mount installation (rack ears can also be used for chassis-supported surface-mounting) | ||
| AC power input | 100-240 V, 50/60Hz, 5.2-2.8 A | ||
| Product dimensions (L × W × H) | 15.0 × 19.0 × 3.5 in (381 × 483 × 89 mm) | ||
| Product weight | 22.9 lbs (10.4 kg) | ||
| Included accessories |
1x AC mains power cord (country specific) Removable rack ears for rack- or surface-mounting 4-position 7.62mm pitch Euroblock connectors (Qty 8) 3-position 3.5mm pitch Euroblock connectors (Qty 16) 12-position (2-row) 3.5mm pitch Euroblock connector (Qty 1) |
||

