Kramer's VSM 4x4X is a 4X4 seamless matrix switcher that can also be used as a video wall driver (2X2 or 1X4), a quad−viewer, or a 4 picture multi−viewer.

The unit allows instantaneous switching between inputs (that is, with a clean, frame−to−frame video cut). The VSM 4x4X supports HDMI 2.0 and HDCP 2.2, with resolutions up to 4K60 4:4:4, per−port HDCP and EDID settings, passing of 4 channels of embedded audio, and analog stereo de−embedded audio for each of the 4 outputs.

• PixPerfect™ Scaling Technology — Kramer’s precision pixel mapping and high quality scaling technology.

• Matrix Switching Modes — Truly seamless switching mode (zero–time video cuts), or fade–through–black mode (enabling independent output resolutions).

• Multiple Aspect Ratio Selections — Full and best fit.

• 4 Preset Memory Locations — For each operation mode for quick access to common IN OUT configurations.

• Non–Volatile Memory — Saves final settings.

• Built–in Noise Reduction and Picture Enhancement Features

• HDMI Support — 4K@60Hz, Deep Color, x.v.Color™, 7.1 PCM, Dolby TrueHD, DTS–HD, as specified in VHDMI 2.0.

• Selectable Operation Modes — 4x4 matrix switcher, video wall (2x2 or 1x4 configuration), multi–view display Split, Side–by–Side, PIP, POP, Stacked or Quad display.

• Bezel Correction Options — In video wall mode.

• Constant Output Sync — For all modes of operation.

• Built–in Video ProcAmp — Color, hue, sharpness, noise, contrast and brightness set individually for each input.

• Firmware Upgrade — Ethernet based, via a user–friendly software upgrade tool.

• Advanced EDID management per Input

• Video inputs and Outputs — 4 HDMI Inputs and 4 Scaled HDMI Outputs.

• Audio Outputs — 4 balanced audio outputs with independent volume settings per output, embedded audio on the HDMI inputs and outputs.

• Presentation and multimedia

• Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios, rental and staging.

• Video wall: large signage applications in public places.

• Any application where high quality conversion and switching of multiple and different video signals to graphical data signals is required for display or projection purposes.

TECHNICAL SPECIFICATIONS

INPUTS

• 4 HDMI: On female HDMI connectors

OUTPUTS

• 4 HDMI: On female HDMI connectors

PORTS

• 4 Balanced Stereo Line Level: On 5−pin terminal block connectors

• RS−232: On a 3−pin terminal block

• Ethernet: On an RJ−45 female connector

VIDEO

• Max. Bandwidth: 18Gbps (6Gbps per graphic channel)

• Max. Resolution: 4K @60Hz (4:4:4) 24bpp

• Compliance: HDMI 2.0 and HDCP 2.2

• Latency: Up to 20ms

CONTROLS

• Front Panel Controls: Output and input selector buttons, system setup buttons (matrix, video wall, and multi−view), store and recall buttons, display identify button, reset button, and panel lock button

ANALOG AUDIO

• Max Level: 4.1Vrms

• Impedance: 500Ω

• Bandwidth: 20Hz − 20kHz

• Crosstalk: −114dB

• THD + N: 0.005% @1kHz at nominal level

• S/N Ratio: −89dB, 20Hz − 20kHz

• Coupling: DC

POWER

• Consumption: 100−240V AC, 98VA max

• Heat Dissipation: 55W (188BTU/hr)

ENVIRONMENTAL CONDITIONS

• Operating Temperature: 0° to +40°C (32° to 104°F)

• Storage Temperature: −40° to +70°C (−40° to 158°F)

• Humidity: 10% to 90%, RHL non−condensing

REGULATORY COMPLIANCE

• Safety: CE, FCC

• Environmental: RoHS, WEEE

ENCLOSURE

• Size: 19”, 1U

• Type: Aluminum

• Cooling: Fan ventilation

GENERAL

• Net Dimensions (W x D x H): 43.6cm x 18.3cm x 4.4cm (17.2" x 7.2" x 1.7")

• Shipping Dimensions (W x D x H): 55.0cm x 27.6cm x 10.7cm (21.6" x 10.9" x 4.2")

• Net Weight: 1.8kg (4lbs)

• Shipping Weight: 2.9kg (6.4lbs) approx

ACCESSORIES INCLUDED

• Power adapter cord

PRODUCT DIMENSIONS

• Dimensions (W x D x H): 43.6cm x 18.3cm x 4.36cm (19" x 7.20" x 1U)

• Weight: 1.9kg (4.1lbs) approx

• Shipping Dimensions: 55.0cm x 27.6cm x 10.7cm (21.65" x 10.87" x 4.21")

• Shipping Weight: 2.9kg (6.4lbs) approx

• VSM–4x4X Quick Start

• VSM–4x4X User Manual

• VSM–4x4X Release Notes